Filter
Top Products
8
9
FEATURES
KNOW YOUR RIGHT ANGLE DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
CHUCK KEY
A chuck key has been provided for use when installing or
removing bits and removing the chuck. When not in use, the
chuck key can be placed in the key strap.
EXTERNALLY ACCESSIBLE BRUSHES
Externally accessible brushes extend the life of the ma-
chine.
LIGHTED PLUG
This drill has a 12-foot power cord and cord wrap with a
lighted plug to easily identify live tools.
FORWARD/REVERSE SWITCH
The drill has a forward/reverse switch located on the handle
of the tool.
PIPE HANDLE
This drill is equipped with a heavy-duty pipe handle for ease
of operation and to prevent loss of control. The handle can be
installed onto either side of the drill for right- or left-handed
operation.
SPEED SELECTOR
There is a speed selector on the side of the drill for three
speeds: HIGH, MEDIUM and LOW.
THREE POSITION BAIL HANDLE
This drill is equipped with a bail handle that can be adjusted
to three different operating positions.
UNPACKING
This product requires assembly:
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
1/2 in. Right Angle Drill
Pipe Handle
Chuck Key
Key Strap
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.