Filter
Top Products
19
OPERATION
TO ADJUST BEVEL SETTING
See Figure 23.
Unplug the saw.
Loosen bevel adjustment knob.
Raise motor housing end of saw until you reach desired
angle setting on bevel scale.
Tighten bevel adjustment knob securely.
WARNING:
Attempting a bevel cut without having the bevel ad-
justment knob securely tightened can result in serious
injury.
TO BEVEL CUT
See Figure 24.
Hold the saw firmly with both hands as shown.
Rest the front edge of the base on the workpiece.
Start the saw and let the blade reach full speed.
Guide the saw into the workpiece and make the cut.
Release the switch trigger and allow the blade to come
to a complete stop.
Lift the saw from the workpiece.
Fig. 22
Fig. 23
BLaDe guiDe
NOTCH
15
30
51.5
45
BeVeL
aDJuSTMeNT KNOB
51.5° BeVeL
NOTCH
BeVeL
SCaLe
0
1
2
3
BeVeL
SCaLe
BeVeL
aDJuSTMeNT
KNOB
guiDeLiNe
51.5
15
30
45
90° BLaDe
guiDe NOTCH
45° BLaDe
guiDe NOTCH
Fig. 24
MOTOr HOuSiNg
BeVeL SCaLe