Filter
Top Products
7
FEATURES
KNOW YOUR CROSSHAIR LASER LEVEL
See Figures 1 - 2.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
ADJUSTMENT KNOBS
The rotational and line height adjustment knobs are used to
fine tune your laser line settings.
AIRGRIP VACUUM TECHNOLOGY
This product uses a vacuum base that can adhere to smooth
surfaces. Using the vacuum seal prevents wall damage
caused by nails or adhesive tape. The vacuum base also
features a 5/8 in. - 20 tripod mount.
HOOK-AND-LOOP STRAP
The hook-and-loop strap can be used to attach the unit to
a variety of irregularly shaped surfaces.
LASER HOUSING
The laser housing on your level rotates to allow for 360˚ of
laser line coverage.
LASER POWER/MODE SELECTOR
The laser power/mode selector is used to select one of three
available operating modes — horizontal mode, vertical mode,
or crosshair mode.
MULTI-FUNCTION BASE
The multi-function base allows the laser level to be used on
irregularly shaped walls or objects. It features built-in loops
for a hook-and-loop strap, angled holes for push pins, and
storage compartments for the push pins and the 1/4 in.
tripod adaptor. The base also protects the unit when using
on a dusty or dirty surface and during storage.
ROUGH SURFACE ADAPTOR
The rough surface adaptor increases the number of surfaces
on which the AIRgrip vacuum can be used.
VACUUM BASE ON/OFF BUTTON
The vacuum base of your laser level conveniently turns on
and off at the touch of a button.
Fig. 2
ROUGH SURFACE
ADAPTOR
HOOK-AND-LOOP
STRAP
PUSH PIN
HOLES
TRIPOD ADAPTOR
AND ADAPTOR
STORAGE
STRAP
LOOPS
MULTI-FUNCTION
BASE
PUSH PIN
AND PIN
STORAGE