Filter
Top Products
SCROLL CUTTING
See Figures 9, 10, and 11.
The scroll cutting feature is designed to permit 360°
rotation of the saw blade so that intricate designs may be
cut with minimum effort.
n Set the orbit adjustment to “0”.
n Loosen the base locking lever as shown in figure 9.
n Slide the base back to move the blade-support roller out of
the way of the saw blade as shown in figure 10.
n Retighten the base locking lever.
n Unlock the scrolling mechanism of your saw by sliding the
scrolling knob lock, located on the front of the jig saw, to
the right.
n Rotate the scrolling mechanism with your free hand as
you apply pressure in the direction of the cut with your
other hand as shown in figure 11.
OPERATION
Fig. 9
Fig. 10
Fig. 11
TO LOOSEN TO TIGHTEN
SCROLLING
KNOB LOCK