Filter
Top Products
9 - English
FEATURES
PRODUCT SPECIFICATIONS
Motor ..................................................18 Volt DC
Bar Length .................................................. 10 in.
Replacement Bar
Part Number ...........671256002 or 671834007
Replacement Chain
Part Number ...............6958301 or 690583002
NOTE: This saw was designed for occasional
light duty use and has some limitations as to
what it can cut.
ASSEMBLY
UNPACKING
This product has been shipped completely
assembled.
Carefully remove the product and any acces-
sories from the box. Make sure that all items
listed in the packing list are included.
WARNING:
This new product has been shipped in a partially
assembled condition as described below. Care-
fully check the packing list below to ensure all
items are included in the package. The pack-
ing list describes all loose items that are not
assembled to the product as shipped. Do not
operate the product if any packing list items are
already assembled to your product when you
unpack it. Call the customer service number
below for assistance. Operation of a product
that may have been improperly preassembled
could result in serious personal injury.
Inspect the product carefully to make sure no
breakage or damage occurred during ship-
ping.
Do not discard the packing material until you
have carefully inspected and satisfactorily oper-
ated the product.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Chain Saw with Scabbard
Wrench
Bar and Chain Lubricant
Operator’s Manual
Battery Pack
Charger
WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Failure to heed this warning could result in seri-
ous personal injury.
WARNING:
Do not attempt to modify this product or cre-
ate accessories not recommended for use with
this product. Any such alteration or modifica-
tion is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the bat-
tery pack from the product when assembling
parts.
KNOW YOUR CHAINSAW
See Figure 5.
The safe use of this product requires an
understanding of the information on the product and
in this operator’s manual as well as a knowledge
of the project you are attempting. Before use of
this product, familiarize yourself with all operating
features and safety rules.