Filter
Top Products
12
The following tools (not included) are needed for assembly and making adjustments:
TOOLS NEEDED
FEATURES
BLADES
For maximum performance, it is recommended that you use
the 10 in. carbide-tipped combination blade provided with
your saw. Additional blade styles of the same high quality are
available for specific operations such as ripping. Your local
dealer can provide you with complete information.
Blade kerf width must be within the limits stamped on the
riving knife.
WARNING:
Do not use blades rated less than the speed of this tool.
Failure to heed this warning could result in personal
injury.
Fig. 4
FRAMING SQUARE
PHILLIPS
SCREWDRIVER
FLATHEAD
SCREWDRIVER
COMBINATION
SQUARE
ADJUSTABLE WRENCH
C-CLAMPS
HEX KEY (3 mm)