Ryobi S606D Sander User Manual


 
Page 7
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your sander has been shipped completely assembled.
Carefully remove the tool and accessories from the box.
Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
APPLICATIONS
APPLICATIONS
(Use only for the purposes listed below)
1. Sanding on wood surfaces.
2. Removing rust from and sanding steel surfaces.
3. Sanding plastics.
Size of Paper .......................................................................................................................................................... 1/4 sheet
Motion ............................................................................................................................................................... Orbital Action
Orbit Diameter............................................................................................................................................. 1/16 in. (1.6 mm)
No Load Speed .................................................................................................................................................. 14,000 OPM
Input ................................................................................................................................................................... 2.0 Amperes
Rating.................................................................................................................................................... 120 Volts, 60 Hz, AC
PACKING LIST
1/4 Sheet Orbital Sander
Sandpaper (3 sheets)
Conversion Pad
Operator’s Manual
WARNING:
If any parts are missing, do not operate your sander
until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.