Filter
Top Products
Page 8
UNPACKING
CAUTION:
To prevent accidental starting or electrical shock that
could cause possible serious personal injury, assemble
all parts to your saw before connecting it to power supply.
Saw should never be connected to power supply when
you are assembling parts, making adjustments, lubricating,
installing or removing blades, cleaning, or when not in
use.
■ Carefully lift saw from the carton and place it on a level
work surface.
■ Remove pack of 4 extra blades and operator's manual
from the carton.
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
■ Do not discard the packing materials until you have
carefully inspected the saw, identified all parts, and
satisfactorily operated your new saw.
Note: If any parts are damaged or missing, do not attempt to
plug in the power cord and turn the switch on until the
damaged or missing parts are obtained and are installed
correctly.
Your scroll saw comes completely assembled. A package of
4 extra blades, blade changing rod, "T" handle wrench, and
an operator's manual are included with your saw.
TOOLS NEEDED
The small combination square shown in figure 2 is the only
tool (not provided) you will need for making adjustments and
alignment:
SMALL
COMBINATION
SQUARE
Fig. 2
Fig. 3
0˚
ON/OFF KNOB
MOTOR
LOCK OFF POST
TABLE LOCK LEVER