Filter
Top Products
Page 2
Look for this symbol to point out important safety precautions.
It means attention!!! Your safety is involved.
■ Table of Contents .......................................................................................................................................... 2
■ Product Specifications .................................................................................................................................. 2
■ Rules for Safe Operation ........................................................................................................................... 3-5
■ Electrical........................................................................................................................................................ 6
■ Unpacking, Loose Parts List and Tools Needed ........................................................................................... 7
■ Features ........................................................................................................................................................ 8
■ Assembly.................................................................................................................................................. 9-10
■ Operation ............................................................................................................................................... 11-12
■ Maintenance................................................................................................................................................ 13
■ Parts Ordering / Service .............................................................................................................................. 14
WARNING:
The operation of any grinder can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always wear eye protection which is marked to comply with ANSI Z87.1.
Wheels:
- Diameter
- Thickness
- Arbor Hole
Input
No Load Speed
Rating
Tool Weight
8 in. (203 mm)
1 in. (25.4 mm)
5/8 in. (16 mm)
120 Volts, AC 60Hz Only
3600 RPM
3.1 Amperes
34 lbs. (15 kg.)
BGH826
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS