Schumacher PID-750 Welding System User Manual


  Open as PDF
of 28
 
2
IMPORTANT SAFETY INSTRUCTIONS
Save These Instructions
Before using your PID-750, read and understand this
Owner’s Manual.
• Keeptheinverterwellventilatedinordertoproperlydis-
perse heat generated while it is in use. Make sure there
are several inches of clearance around the top and sides
and do not block the slots of the inverter.
• Makesuretheinverterisnotclosetoanypotentialsource
ofammablefumes,gasesorclothing.
• Keeptheinverterdry.
•DONOTallowtheinvertertocomeintocontactwithrain
or moisture.
•DONOToperatetheinverterifyou,theinverter,thedevice
being operated or any other surfaces that may come in
contact with any power source are wet. Water and many
other liquids can conduct electricity, which may lead to
serious injury.
• Donotplacetheinverteronornearheatingvents,radia-
tors or other sources of heat.
• Donotplacetheinverterindirectsunlight.Theidealair
temperature for operation is between 50° and 80°F.
• Donotusetheinverternearanopenenginecompart-
ment.
 previous next