Sears 113.23611 Saw User Manual


 
13.Toturnmachineon,place finger under switchlever
and pull end of switch ouL
C. Toturn machine OFF_.PUSH lever in.
NEVER LEAVE THE MACHINE UNATTENDED
UNTIL IT HAS COME TO A COMPLETE STOP,
O
D. Tolock switch inOFF position.., hold switch INwith
one hand,..REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH "OFF" WHEN MACHINE IS
NOT IN USE.,.REMOVE KEY AND KEEP IT IN A
SAFE PLACE...ALSO...IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO
OUT) TURN SWITCH OFF... REMOVE THE KEY
AND STORE IT REMOTE FROM THE SCOLL SAW.
THIS WILL PREVENT THE MACHINE FROM
STARTING UP AGAIN WHEN THE POWER
COMES BACK ON,
©
6. TABLE LOCK KNOB,.. Looseningthe knob allows table to
be tilted up to45° for beret cutting, Tightening the knob
locksthe table in the position youhave selected.
7. BEVEL POINTER,.. Indicates what angle you have selected
on the bevel scale.
8. BEVEL SCALE... Used toset the approximate table angle
for bevel cutting. 13