Filter
Top Products
2. A bevel scale is provided under the work table as a conve-
nient reference for setting the approximate table angle for
bevel cutting.
When greater precision is required, make practice cuts and
adjust the table as necessary for your requirements.
• • _••• •i;¸ :•• •• •
TO ALIGN THE BEVEL INDICATOR
1. Loosen the table bevel lock knob and move the table until
it is approximately perpendicular, or at a right angle, to the
blade.
2. Use a small square to set the table at 90 degrees to the
blade. If there is too much space between the square and
the blade the table must be adjusted.