Filter
Top Products
3. Use a blade that will have at least 2 teeth in the mate-
dal at ail times.
4, Use thin, narrow blades for tight radius work, and thi¢_
wide blades for large curves and straight cuts.
Listed below are examples of some blades and their intended uses: ....
Pin and Plain end Biades
:'Teeth/inch Width Thickness
i, .... ha-
20 .__2 .012"
15 : _110_'..... .0t 8"
Speed : _ _ Application
500-600 Tight radius work; 3/32" to 1/8' wood veneer, wood,
bone, fiber, plastics, non-ferrous metals, etc.
12:5
11.5
10
.038"
.053'_
.110"
+:+o666'
.0i8"
!
:,018"
600-1200
1200-1700
Close radius cutting in materials 3/32" to 1/2" thick.
Good for hard and soft wood, bone, horn, plastics, etc.
For hard and soft woods and woodlike products
3/16" to 2".
16