Filter
Top Products
12
KNOW YOUR CORDLESS DRILL /DRIVER (Fig. 1)
DESCRIPTION
NOTE: Before attempting to use this product, familiarize yourself with all operating
features and safety rules.
Torque Adjustment Collar
Keyless Chuck
Forward/
Reverse
Selector
Switch with
Power
Lock-Off
Trigger Switch
Charging Stand
On-Tool Bit
Storage
Battery Pack
Chuck Jaws
Transformer
Red LED
Light
Green LED
Light
Latch to
Release
Battery
Pack
Bubble Level
This Drill / Driver has many features for making its use more pleasant and enjoyable. Safety,
performance and dependability have been given top priority in the design of this product,
making it easy to maintain and operate.
This Cordless Drill / Driver has the following features:
1. Forward / Reverse Selector Switch with Power Lock-Off This switch is located above
and to the rear of the trigger switch. This switch has embossed arrows which show bit
rotation (forward or reverse). Push switch completely to left or right for desired rotation.
Push switch to center position to lock power off. This “lock power off” position helps
reduce the possibility of accidental starting when your drill / driver is not in use or you
are changing accessory bits.
2 Double ended Screwdriver Bits
Phillips
Slotted / Square Drive
10-4-07 Drill
10300-10400
5
7
3
1
9
C
o
mp
a
n
i
o
n
13
DESCRIPTION cont.
This Cordless Drill / Driver has the following features cont.:
2. Keyless Chuck allows you to hand-tighten or loosen and release accessory bits in the
chuck jaws without a chuck key.
3. Torque Adjustment Collar provides you with 15 + 1 different torque settings, ideal for
driving different types of screws into different types of materials, and a setting for heavy
(twist bit) drilling (most torque).
4. Electric Brake stops the bit rotation as soon as the trigger switch is released, ideal when
driving screws.
5. Bubble Level help provide more accurate vertical and horizontal drilling and driving.
6. Magnetic Bit Tray for holding screwdriver bits. This tray is located at the front base of the
drill / driver’s handle and is handy for keeping the bits you are using on a project ready for
use.
7. Soft-Grip Handle Insert provides positive gripping for maximum control and comfort.
8. Includes 2 Double Ended Scredriver Bits, 1 phillips and 1 slotted / square drive
PRODUCT SPECIFICATIONS
Model No. 10300:
Chuck
Motor
Switch
No Load Speed
Model No. 10400:
Chuck
Motor
Switch
No Load Speed
3/8-in. keyless
9.6 Volt
Variable Speed
0-500/min.
3/8-in. keyless
12.0 Volt
Variable Speed
0-500/min.
Clutch
Torque
Charger Input
Charge Rate
Clutch
Torque
Charger Input
Charge Rate
15 + 1 Position
Max. 80 in.-lbs.
120V, 60Hz AC
3 – 5 Hours
15 + 1 Position
Max. 85 in.-lbs.
120V, 60Hz AC
3 – 5 Hours