Filter
Top Products
• 16 •
Reviving your battery17.2 : If you only wish to charge your battery enough to
operate the vehicle, you don’t need to wait for the entire charging process.
When the charger displays a battery % of 77 or more, the battery has usu-
ally been charged enough for the vehicle to start and operate normally.
Completing an interrupted charge17.3 : If the charging process has been
interrupted and restarted after the charger displays a battery % of 85 or
more, the charger could go straight to Maintain Mode. However, if the
original charge was started using 30A, the charge can often be completed
using the 2A rate.
MAINTENANCE INSTRUCTIONS18.
Before performing maintenance, unplug and disconnect battery charger 18.1
(see sections 6.7 and 7.6).
After use, use a dry cloth to wipe all battery corrosion and other dirt or oil 18.2
from terminals, cords, and the charger case.
Servicing does not require opening unit, as there are no user-serviceable 18.3
parts.
STORAGE INSTRUCTIONS19.
Store charger unplugged, in an upright condition. Cord will still conduct 19.1
electricity until it is unplugged from outlet.
Store inside, in a dry, cool place (unless you’re using an on-board Marine 19.2
Charger ).
Do not store clips on handle, clipped together, on or around metal, or 19.3
clipped to cables.