Filter
Top Products
FULL ONE YEAR WARRANTY ON CRAFTSMAN CIRCULAR SAW
If this Craftsman Circular Saw fails to give complete satisfaction within one yearTff_o-_w-thedate of
purchase, RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and
Sears will repair it, free of charge.
If this circular saw is used for commercial or rental purposes this warranty applies for only 90 days
from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
SEARS, ROEBUCK AND CO.
DEPT. 698/731A
SEARS TOWER
CHICAGO, IL 60684
INTRODUCTION
DOUBLE INSULATION is a concept in safety, in
electric power tools, which eliminates the need for
the usual three wire grounded power cord and
grounded supply system. Wherever there is electric
current in the tool there are two complete sets of in-
sulation to protect the user. All exposed metal parts
are isolated from the internal metal motor com-
ponents with protecting insulation.
IMPORTANT -- Servicing of a tool with double in-
sulation requires extreme care and knowledge of the
system and should be performed only by a qualified
service technician. For service we suggest you
return the tool to your nearest Sears Store for repair.
Always use original factory replacement parts when
servicing.
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL m Read owner's manual carefully. Learn its
applications and limitations as well as the specific potential hazards related to
this tool.
2. GUARD AGAINST ELEC_'RICAL SHOCK BY PREVENTING BODY CONTACT
WITH GROUNDED SURFACES. For example: Pipes, radiators, ranges,
refrigerator enclosures.
3. KEEP GUARDS IN PLACE and in working order. Never wedge or tie lower blade
guard open. Check operation of lower blade guard before each use. Do not use
if lower blade guard does not close briskly over saw blade. WARNING: IF SAW
IS DROPPED, LOWER BLADE GUARD MAY BE BENT, RESTRICTING FULL
RETURN. If lower blade guard becomes bent or damaged, replace it before
reuse.
4. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
5. AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet
locations or expose to rain. Keep work area well lit.
6. KEEP CHILDREN AWAY. All visitors should wear safety glasses and be kept a
safe distance from work area. Do not let visitors contact tool or extension cord.
7. STORE IDLE TOOLS. When not in use, tools should be stored in a dry, high or
locked-up place -- out of the reach of chiidren.
8. DON'T FORCE TOOL. It will do the job better andsafer at the rate for which it
was designed.
Page 2