Filter
Top Products
CLEANING TIPS
PART
BRUSHED CHROME
COOKTOP
CLEANING MATERIALS
Detergent, warm water, plastic
or nylon scouring pad or bell In
Dip-it@ solution to remove stub-
bern soil
REMARKS
Do not scour chrome tops. Stubborn
stains may be removed by using Esprse
Magwheel Cleaner® or Turtle Wax Pol-
Ishing Compound®. To remove finger
prints on brushed chrome, apply a little
baby oll with a paper towel. Rub In the
direction of the brush marks. Armor All
Protectant®can also beused (afterclean-
Ing). Be sure to clean spills of acidic
foods quickly. Vinegar spills can perma-
nently stain chrome.
GLASS OVEN DOOR/WIN- Glass cleaner and paper towels Remove stubborn soil with paste of bak-
DOW (SOME MODELS) Ing soda and water. Do not use abrasive
cleaners. Rinse thoroughly.
BROILER PAN AND GRID Detergent,warm water, soft cloth
or a chrome cleaner or special
cooktop cleaning creme
Remove soiled pan from oven to cool.
Drain fat or drippings. FIll panwlth warm
water. Sprinkle grid with detergent and
cover with damp cloth or paper towels.
Let pan and grid soak for a few minutes.
Rinse or scour as needed. Dry well. Grid
and pan may be washed Ina dishwasher.
REMOVABLE COOKTOP BURNER
COMPONENTS
Be sure that all controls are turned off and that the unit
IS cool.
To remove:
Lift off burner grate, burner top and trim ring. Do not
remove burner bowl.
See the Cleaning Tips Chart In this manual. Be sure to
dry burnertope completely before re-assembling burner.
The electrode of the spark igniter is
exposed beyond the top of the
burner. When cleaning the burner
bowl, be careful not to snag the
electrode of the spark igniter with
your cleaning cloth. Damage to the
igniter could occur. Be careful not
to turn on any cooktop controls while
cleaning burner bowls. A slight
electrical shock might result, which
could cause you to knock over hot
cookware.
To replace:
1. Place the trim ring on the burner body.
2. Position the burner top on the burner body. To correctly
seat the burner top, examine the four notches on the
underside of the burner top. One of them is shaped 18
dlfferentlythan the otherthrse. Itincludesan Indexingkey
for the spark ignner. The notch with the Indexing key
fits over the spark Igniter when positioning burnertop.
3. Place burner grate over burner assembly and Into
burner bowl. The bottoms ofthe four larger burner
grate fingers fit Into four corresponding Indentations
in the burner bowl.
SPARK
IGNITER
ER GRATE
BURNER TOP
TRIM RiNG
BURNER BOWL
BURNER
BODY
NGCCH33