Filter
Top Products
4
ASSEMBLY
CARTON CONTENTS
1. Boom Mount Bracket
2. Lid
3. Tank with Frame Tubes
FIGURE 1
REMOVAL OF PARTS FROM CARTON
• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.
TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
4. Spray Gun Assembly
5. Boom Assembly
6. Hitch Arms (2)
7. Hitch Brackets (2)
8. Axle
9. Wheels (2)
FIGURE 2
• Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts and
5/16" nylock nuts as shown in gure 2. Do not tighten
yet. Repeat for other side.
2
1
5
8
7
3
4
9
6
• Assemble the axle through the holes in the frame
tubes. You may need to slightly loosen the bolts in the
frame tubes to make the axle t. Retighten the bolts
only enough to atten the lockwashers. See gure 1.
• Assemble a spacer, a 1/2" at washer, a wheel and
another 1/2" at washer onto the axle. Lightly tap a
palnut onto the end of the axle. Repeat on other end
of axle. See gure 1.
1/2" FLAT
WASHER
SPACER
AXLE
PALNUT
5/16" x 2"
HEX BOLT
5/16" NYLOCK NUT
HITCH ARM