Filter
Top Products
ASSEMBLY
-15-
To connect the dust port to a trash bag, do
these steps:
1. Slip the filter bag spring into the filter bag
arm.
2. Slide the filter bag arm over the dust port.
3. Assemble the trash bag support by sliding
the connectors into the channels of the
trash bag support segments (Figure 17).
4. Slide the opening of the trash bag inside and
over the trash bag support (Figure 18). Let
the trash bag hang over approximately 3"-
4".
5. Secure the filter bag to the trash bag/sup-
port assembly with the filter bag band
(Figure 19). Make sure the filter bag band
rests in the channel of the trash bag sup-
port.
Figure 17. Assembling the trash bag support.
Figure 18. Sliding the trash bag over the trash
bag support.
Figure 19. Filter bag secured to
the trash bag.