Filter
Top Products
ADJUSTMENTS
-17-
There are three fence angle stops: 90˚, 45˚
inward, and 45˚ outward. The angle stops allow
the fence to be quickly and accurately posi-
tioned at various angles.
To adjust the 90˚ angle stop, do these steps:
1. Using a machinist’s square, position the
fence 90˚ relative to the table surface
(Figure 21).
2. Position the limit plate in the forward slot
of the 90˚ slide stop.
3. Loosen the jam nut on the 90˚ stop slide.
4. Using a flat-head screwdriver, adjust the
setscrew on the 90˚ stop slide until the peg
makes contact with the back of the fence
(Figure 22).
5. Retighten the jam nut loosened in step 3.
Figure 21. Setting the fence to 90˚.
Figure 22. Adjusting the 90˚ stop slide.
Fence Angle Stops