Filter
Top Products
W1702 Manual Update
Fence Housing Assembly
To mount the fence housing assembly, do these steps:
1. Secure the adjustment bracket portion of the fence
housing assembly to the table with the three cap
screws and washers, as shown in
Figure 8.
Figure 8. Fence housing assembly
installed on table.
Adjustment
Bracket
Cap Screws
All guards MUST be installed on your
shaper before operating it. Shapers are
dangerous machines that can quickly
cause serious injury if some kind of
guard is not used. To protect yourself,
read and follow the entire instruc-
tion manual carefully and do additional
research on shop made guards and
safety jigs.
Guard Warning
All Other Assembly
All other assembly to the machine MUST be performed as
described in the W1702 Manual. If you have any questions
that cannot be answered reading this manual update
or the full W1702 manual, please contact our Technical
Support at (360) 734-3482 or send email to:
tech-support@shopfox.biz.