Filter
Top Products
-22-
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. DO NOT lubricate them.
Lubricate the unpainted parts of the bed regu-
larly ( ) to prevent rust and ensure a
smooth sliding action from the tool post holder
and the tailstock. Your goal is to achieve ade-
quate lubrication. However, too much lubrica-
tion will attract dirt and sawdust, which may
cause these components to lose their freedom
of movement.
In addition, clean the headstock and tailstock
barrel tapers () on a regular basis.
To ensure optimum performance from your
lathe, make a habit of inspecting it before each
use.
Loose mounting bolts.
Worn switch.
Worn or damaged cords and plugs.
Any other condition that could hamper the
safe operation of this machine.
Cleaning/lubricating unpainted part
of the bed.
Cleaning spindle tapers.