Filter
Top Products
SET UP
-11-
W1736 Overarm Router
Figure 7. Hose/port labels on foot switch,
as viewed straight on.
Figure 8. Air hose attachment locations.
The foot switch attaches to the valves on the overarm
router assembly with the two small air hoses. The air
hose ports at the foot switch are labeled "R" and "S", as
shown in Figure
7.
To attach the foot switch, do these steps:
1. Attach the hose connected to port "R" to the top
valve (see
Figure 8) on the air cylinder by pushing
the hose into the fitting.
2. Attach the hose connected to port "S" to the bottom
valve on the air cylinder by removing the nut, push
-
ing the hose all the way over the lip on the fitting,
and tightening the nut over the threads.
Attaching Foot Switch
R S
Top
Valve
Bottom
Valve