Filter
Top Products
-16-
W1758 Owner's Manual (Mfg. Since 3/10)
The Model W1758 headstock can be positioned anywhere
along the bed and swiveled 360°.
DISCONNECT THE LATHE FROM POWER!
Loosen the headstock locking lever (see ).
Position the headstock along the lathe bed and
secure it in place by tightening the locking lever.
The large clamping hex nut underneath the
headstock may require occasional adjusting to
ensure proper clamping pressure of the headstock to
the bed.
DISCONNECT THE LATHE FROM POWER!
Loosen the headstock locking handle (see
).
Pull out the headstock rotation locking pin (see
), and rotate the headstock in place.
Release the locking pin to secure the headstock in
one of the five pre-set positions: 0°, 60°, 90°, 120°,
or 180°.
Re-tighten the headstock locking lever.
Headstock locking lever.
Headstock rotation locking pin.