Filter
Top Products
Model W1802 2 QT. Professional Spray Gun
-8-
OPERATIONS
EXPLOSION HAZARD! DO NOT smoke
or have any source of flame or spark
near spraying. Vapors will explode if
ignited.
RESPIRATORY HAZARD! Always use
respirator rated for organic vapor and
solvent use when using spray equip-
ment. Failure to protect your lungs
can lead to respiratory illness and
nervous system damage.
TOXIC FUMES! Always use an approved
spray booth or well ventilated area
when spraying. NEVER spray in a con-
fined space where toxic fumes and
flammable vapors can accumulate to
deadly levels.
Spraying
The Model W1802 spray system is
designed to spray medium to high
viscosity liquids. It is ideal for painting
large areas such as trucks, busses, and
vans.
To use your spray system:
1. Read and follow the material
manufacturer's instructions for
spraying, mixing, safety, disposal,
and any other instruction on the label
or Material Safety Data Sheet (MSDS).
2. After mixing, filter the material
through a strainer while filling the
pressure cup. (Strainers are available
from your paint supplier.)
3. Fill the pressure cup
3
⁄4 full or less.
DO NOT OVERFILL. Overfilling will
cause pressurization problems and
contribute to leaks and spills.
4. Tighten the cap securely on the
pressure cup and ensure all other
fittings are secure to avoid air leaks
or material spills.
5. Set the inlet air pressure (the air
coming to the pressure cup) between
29 and 43.5 PSI or to the material
manufacturer's recommendations. DO
NOT exceed 50 PSI for any reason.
Note: Periodically pull the ring on
the safety valve to ensure it moves
freely. Do not use the pressure cup if
the safety valve is not working!