Filter
Top Products
-28-
W1808/W1809/W1810 Cyclone Dust Collectors
OPERATIONS
OPER ATIONS
General
DO NOT investigate problems or adjust
the cyclone dust collector while it
is running. Wait until the machine
is turned
OFF, unplugged, and all
working parts have come to a com
-
plete stop before proceeding!
The Model W1808/W1809/W1810 is designed to be a cen-
tral dust collector system, and is capable of collecting
dust from multiple machines running simultaneously.
Because of the large suction capacity of the Model W1808/
W1809/W1810, great flexibility is possible in the planning
and designing of your dust collection duct layout.
However you choose to build your dust collection system,
always make sure there are no open flames or pilot lights
in the same room as the dust collector. There is a risk of
explosion if dust is dispersed into the air near flames.
The instructions in this section are written with the under
-
standing that the operator has the necessary knowledge
and skills to operate this machine. If at any time you
are experiencing difficulties performing any operation,
stop using the machine!
If you are an inexperienced operator, we strongly recom
-
mend that you read books, trade articles, or seek train
-
ing from an experienced cyclone dust collector operator
before performing any unfamiliar operations. Above all,
your safety should come first!
READ and understand this entire instruc-
tion manual before using this machine.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!
Damage to your eyes, lungs, and ears
could result from using this machine
without proper protective gear. Always
wear safety glasses, a respirator, and
hearing protection when operating this
machine.