Filter
Top Products
6– W2000 Rebel
®
Assembly of The Rebel
®
is extremely straight forward
and can be accomplished with just a few simple hand
tools. In fact, the only tools you will need are a regular
screwdriver, Phillips
®
screwdriver, adjustable wrench,
3
⁄16" Allen
®
wrench and a good quality straight edge.
The design of The Rebel
®
is such that most of the parts
are joined together with socket head cap screws. We
recommend that you assemble The Rebel
®
in the order
presented here. Use the exploded parts diagram for
visual reference during assembly. We suggest that you
use a table or work bench that has sufficient surface
area to hold all of your tools and the finished Rebel
®
safely and securely. It is also best to have a well light-
ed area to reduce eye strain during assembly.
The stand is made up of four legs, two side pieces and
a front piece and back piece. All similar parts are inter-
changeable with one another.
Step 1 - Turn the working table up side down and
loosely bolt on all four legs using the
1
⁄4"-28 x
5
⁄8" socket head cap screws provided.
Step 2 - Mount the short and long side panels between
the legs using the
1
⁄4"-28 x
5
⁄8" socket head cap
screws provided. Figure 2.
Step 3 - Use a
3
⁄16" Allen
®
wrench to assist in starting
and tighten all cap screws down.
Step 4 - Attach the feet to the legs. Figure 3.
Step 5 - Turn the stand assembly over and move on to
the next section.
A. Stand
Figure 2. Mounting legs and side panels to the work-
ing table.
Figure 3. Attaching the feet to the legs.
II. Assembly