Filter
Top Products
-13-
5. Insert plug into power source, hold the saw
firmly, squeeze trigger and slowly push the
saw forward. To make a hole, cut from inside
the circle; To make wheels or discs, cut from
the outside.
Cutting Tip: Cut slowly so the blade will stay
straight in the cut. Place small wedges in the
cut as shown in Fig. 17, to keep the inner
circle from spreading when near the end of
the cut.
BLADE MUST BE IN
ALIGNMENT WITH NAIL
NAIL
FIG. 18
SM 2610916643 2-04 2/24/04 1:50 PM Page 13