Filter
Top Products
32
Safety Instructions
The Digital Flow Sensor have in after referred to as flow sensor
and this manual contain essential information for the protection
of users and others from possible injury and property damage
and to ensure correct handling.
Please check that you fully understand the definition of the
following messages (signs) before going on to read the text, and
always follow the instructions.
Read this manual and follow its instructions. Signal words such
as WARNING, CAUTION and NOTE, will be followed by
important safety information that must be carefully reviewed.
IMPORTANT MESSAGES
Indicates a potentially hazardous situation
which could result in death or serious injury
if you do not follow instructions.
Gives you helpful information.
Indicates a potentially hazardous situation
which if not avoided, may result in minor
injury or moderate injury.
To avoid fire and explosion, Do not use the product for
flammable fluid.
This flow sensor is designed for air. Only dry air, N
2
, CO
2
, Ar are
applicable.
Do not operate in an environment of inflammable, explosive
or corrosive gas.
Fire or an explosion can result.
This flow monitor is not an explosion proof type.
Do not use this product near by a place where static
electricity is a problem.
Otherwise it can cause failure or malfunction of a system.
These instructions must be followed while in maintenance ;
Turn off the power supply, stop the supplied air, exhaust the
residual pressure and verify the release of air before
performing maintenance.
Otherwise it can cause injury.
Do not disassemble, modify (including change of printed
circuit board) or repair.
An injury or failure can result.
Do not operate outside of the specification.
Fire, malfunction or flow monitor damage can result.
Please use it after confirming the specification.
To avoid electric shock, malfunction, and switch damage,
Do not touch live terminal nor connector.