Filter
Top Products
Section A
Panel Mount
Adapter A
Panel
Panel Mount
Adapter B
Push
Insert
Bracket
Section C
24
+0.5
0
A
1110
bracket mounting
•Fasten the bracket mounting screws at a clamping torque of
0.5 0.05N·m.
IN
1
Attached tapping screw
Attached tapping screw
Without flow adjustment
valve
(using ZS-33-M)
With flow adjustment valve
(using ZS-33-MS)
Mounting and Installation
Installation
How to mount
Panel Mount mounting
•Insert Panel Mount Adapter B supplied as an accessory into
Section A of Panel Mount Adapter A.
Push Panel Mount Adapter B from behind till the display is fixed
onto the panel.
The pin of Panel Mount Adapter B engages the notched part of
Panel Adapter C to fix the display.
•The
sensor can be mounted on a panel with a thickness of 1 to
3.2mm.
•See the illustration below for panel cut dimensions.
Without flow adjustment valve
With flow adjustment valve
Dimension A
54
+0.5
74
+0.5
0
0
Adaptor model
ZS-33-J
ZS-33-JS