Filter
Top Products
This symbol is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
WARNING: THIS WARNING IS
APPLICABLE FOR USA AND
CANADA.
If used in USA or Canada, use the UL
LISTED/CSA CERTIFIED power
cord specified below.
DO NOT USE ANY OTHER
POWER CORD.
Plug Cap Parallel blade with ground
pin (NEMA 5-15P
Configuration)
Cord Type SJT, three 16 or 18
AWG wires
Connector IEC 320 non-industrial
type configuration
Length Minimum 1.5 m (4 ft. 11
in.)
Rating Minimum 10 A, 125 V
Warning:
Using this unit at a voltage other than
120 V may require the use of a
different line cord or attachment plug,
or both.
To reduce the risk of fire or electric
shock, refer servicing to qualified
service personnel.
WARNING: THIS WARNING IS
APPLICABLE FOR OTHER
COUNTRIES.
1. Use the approved power cord (3-
core mains lead)/appliance
connector/plug with earthing-
contacts that conforms to the safety
regulations of each country if
applicable.
2. Use the power cord (3-core mains
lead)/appliance connector/plug
conforming to the proper ratings
(voltage, ampere).
If you have questions on the use of the
above power cord/appliance
connector/plug, please consult a
qualified service personnel.
CAUTION
The apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquid, such as vases, shall
be placed on the apparatus.
IMPORTANT
The nameplate is located on the
bottom.