Filter
Top Products
6 ► HG60 User Manual
GRINDING WHEEL SAFETY
• Ensure that the grinding stone is correctly mounted
and tightened before use.
• Operate the grinder at “no load” for 30 seconds in
a safe position and ensure there is no vibration or
other defects detected. If considerable vibration or
other defects are detected, stop operation of the tool
immediately and determine the cause. Do not use
the tool until the defect is corrected.
• If the grinder is dropped with an abrasive stone in-
stalled, the stone should be examined thoroughly
before use.
• Only use abrasive stone that comply with ANSI
B7.1/ISO 525, 603.
• Check that the maximum rpm operating speed of
the abrasive stone is equal to or greater than the
rated shaft speed of the grinder.
• Ensure that the grinding stone dimensions are com-
patible with the grinder and that the grinding stone
ts the shaft.
• Ensure that the thread type and size of the grinding
stone exactly matches the thread type and size of
the shaft.
SAFETY PRECAUTIONS