Bostitch 102272REVB 3/97 Staple Gun User Manual


 
Models T40S2, T40S4, T40S5, and T40SX contain a Quick Release Door feature. The door is designed
to “pop” open if a jam occurs providing easy access for removing a jammed fastener.
ALWAYS DISCONNECT AIR SUPPLY BEFORE CLEARING A JAMMED FASTENER.
If the door does not “pop” open when a jam occurs, it can easily be opened with a screwdriver, as shown in illustration #1.
Use a firm twist on the screwdriver to open the door, see illustration #2.
The door will not open completely if the driver is still down. To open the door completely the driver must be pushed back
into the tool.
The “Quick Release Door” makes cleaning the nose and front portion of the magazine a rapid and easy operation with
a minimum of effort.
To close the door simply press the door firmly against the edge of the work table or suitable stationary object until the two
latch pins snap into a locked position.
CAUTION:
Do not use your hands to close the door as injury may occur if skin is pinched between the door and
nose when the latch pins engage.
WARNING:
!
FIG. 1 FIG. 2
WIDE CROWN NOSE ILLUSTRATED
-11-
QUICK RELEASE DOOR