Filter
Top Products
water. The granulator should be installed in an inside covered,
weather-proof environment and away from any areas where water
collects on the floor.
Once the granulator is in position, the front panel must be opened in order to insert the bin as
illustrated in
Figure 6.
Figure 6: Inserting the Bin
4-3 Electrical Connection
It is extremely important that the machine is correctly wired into
the plant power source by a licensed electrician. See Section 9 for
a wiring diagram.
All electrical equipment must be properly grounded in accordance
with local and national codes to protect personnel from electrical
shock. A fusible, lockable disconnect between the plant power
source and the machine electrical cabinet is highly recommended.
Page 23 of 54