Filter
Top Products
3. Remove the bin.
4. Remove the screw knob that holds the hopper on top of the
cutting chamber. Carefully lower the screen cradle assembly,
resting it on the base.
Remove the screen, keeping it in a horizontal position. (See
5. Figure 12.)
6. Replace the screen with a new one, tighten the screw knob,
reposition the bin, and close the front panel. Unlock the power
and turn the machine back on.
Figure 12: Removing the Screen
6-4 Inspection and Adjustment of Knives
NOTE: This operation must be performed by a qualified
operator / mechanical maintenance technician.
Page 34 of 54