Filter
Top Products
XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 10of 36
Chapter 2: Installation
»
These installation instructions are intended for people with skills in
electrical and mechanical areas due to their training, experience and
received instructions.
Personnel using these installation instructions must be educated about
regulations for accident prevention, operating conditions and safety
regulations. Make sure all personnel are informed accordingly. The
installation instructions provided in the corresponding operating
instructions apply for all connected equipment.
Follow safety regulations with regard to lifting gear handling.
All installation work must be carried out with the electrical power and
compressed air supply OFF.
For installation work taking place at heights of over approx. 6 feet, use
only ladders or similar equipment and working platforms intended for this
purpose. At greater heights, the proper equipment for protection against
falling must be worn.
Use only suitable lifting gear, which is in proper working order and load
suspension devices with sufficient carrying capacity. Do not stand or
work under suspended loads!
Use suitable workshop equipment.
Install the equipment such that all parts are easily accessible; this
facilitates maintenance and repair work.