Filter
Top Products
XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 12 of 36
2-2 Installing the Conveyor Hopper
The single conveyor unit is insensitive to shocks and can be installed directly on
the processing machine.
Make sure that all connections are tight so that the conveying performance is not
impaired. The conveyor hopper is equipped with a universal flange.
Depending on the position, drill the holes for fastening the
conveyor hopper to the processing machine.
Mount the conveyor hopper on the processing machine.
Install the vinyl flexible hose on the conveyor hopper and
on the venturi assemblies using the hose clamps that are
part of the supply.
Note: The hopper should not touch any other component.
4.3 In. (110 mm)
4.3 In.
(110 mm)
0.43 In.
(11 mm)