Filter
Top Products
96127 Second Edition 7
StorageTek Proprietary
Installation
Install the Host Bus Adapters (HBAs)
The following steps explain how to install the host adapters.
1. Quit any applications that are running and halt (down) the operating
system.
Note: If your server supports, Hot Add PCI, refer to your hardware and
manuals for specific instructions.
2. Power off the host, as appropriate.
3. Install the host bus adapter onto the host. See examples below.
4. Power up the host.
Install HBA Drivers
Install the driver according to the instructions that came with the HBA. Refer to
the Interop Tool for the latest connectivity information (see figure below).
Note: As time goes by, drivers are improved; and older drivers are replaced
with newer ones on the supplier’s web page. Contact your sales
support organization for assistance in finding the appropriate
replacement. Download new drivers from the supplier’s web site as
needed. Refer to the Product Release Notes for more information.