Filter
Top Products
Windows - Installation Instructions-
2 Second Edition 96127
StorageTek Proprietary
Select Host Adapter (s)
Pick the type and quantity of the fibre channel Host Bus Adapters (HBAs)
needed for your host systems. See examples as shown below. Refer to the
connectivity information on the Interop Tool for the complete list of HBAs.
Select the Fibre Channel Cables
Select the length of fiber optic (or copper) cable and the quantity for
connection to the host systems. The following is an example of optical cables
that may be ordered through StorageTek to attach a QLA23xxF HBA to the
200/300 Series Controller. Write in the quantities needed.
There are also LC to SC cables that would allow one to use a 2 Gb HBA and
cables with existing switches. The following cables are available in this event.
If installing through a switch, you may need a set of the following.
Check your quantities against your earlier distance measurements to ensure
your order includes all cable attachments. Also, if ordering copper cables,
make sure that the connector ends meet your need. One end mates with the
Quantity Description
Rating
QLogic 2310 2.0 Gb/sec
QLogic 2342 2.0 Gb/sec
Quantity 2 Gb FC Optical Cable Description Part #
10 meters (32.8 feet) LC to LC Duplex 10800221
50 meters (164 feet) LC to LC Duplex 10800222
100 meters (328 feet) LC to LC Duplex 10800223
Note: Other lengths are available. Consult the Siebel Configurator.
Quantity FC Optical Cable Description Part #
10 meters (32.8 feet) LC to SC 10800231
50 meters (164 feet) LC to SC 10800232
100 meters (328 feet) LC to SC 10800233
Quantity 1 Gb FC Optical Cable Description Part #
10 meters (32.8 feet) SC to SC Duplex 10800134
50 meters (164 feet) SC to SC Duplex 10800137
100 meters (328 feet) SC to SC Duplex 10800138
Note: Other lengths are available. Consult the Siebel Configurator.