Studer Innotec XPC 1400-12 Battery Charger User Manual


 
STUDER Innotec
XP-COMPACT
User manual XP-COMPACT V5.1 E 22
9 Technical Data
Model
XPC 1400-12 XPC 2200-24 XPC 2200-48
Inverter
Nominal battery voltage 12V 24V 48V
Input voltage range 9.5 – 16V 19 - 32V 38 - 64V
Continuous power @ 25°C 1100VA 1600VA 1600VA
Power 30 min. @ 25°C 1400VA 2200VA 2200VA
Maximum power load 5 sec. 3 x Pnom
Maximum load up to short circuit
Maximum asymmetric load up to Pcont.
Stand-by adjustment 1 to 25W
Cos ϕ
0.1 - 1
Maximum efficiency 94% 95%
Consumption OFF/Stand-by/ON 0.5/0.6/4W 0.8/0.9/7W 1.2/1.3/7W
Output voltage 230Vac (- 10% / 0)
Output frequency crystal controlled 50Hz +/- 0.05%
Total harmonic distortion < 4% < 2%
Dynamic behaviour on load change 0 to 100% 0.5 ms
Overload and short circuit protection Automatic disconnection with 3 time restart attempt
Overheat protection Acoustic warning before shut-off - with automatic restart
Battery charger (4 STEP) I-U-Uo-Equalize (every 25 cycles)
Charging current adjustable 0 - 45A 0 - 37A 0 - 20A
Input current balance adjustment (Power Sharing) n.a.
Maximum input voltage 265Vac
Minimum input voltage Adjustable threshold from 150 to 230Vac
Input frequency 45 - 65Hz
Power Factor Correction (PFC) EN 61000-3-2
Optional solar charger (4 stages) I-U-Uo-Equalize (every 25 cycles)
Maximum PV open circuit voltage (V) 25V 45V 90V
Maximum charge current (A) 30A 30A 20A
Working principle: I-U-Uo-Equalize (every 25 cycles) Shunt
Battery control (thresholds and times adjustable by the user)
Absorption time 0-4 h
End charge cycle voltage 14.4V 28.8V 57.6V
Floating voltage 13.6V 27.2V 54.4V
Equalization voltage 15.6V 31.2V 62.4V
Deep-discharge protection 10.8V 21.6V 43.2V
Temperature compensation (optional CT-35) -3mV /
o
C / cell
General data
Multifunction contact - potential free (3 points) 16A - 250Vac
Max. current on transfer relay 16A/3.7kVA 16A/3.7kVA 16A/3.7kVA
Transfer time < 20 ms
Weight 11.7 kg 12.6 kg
Dimension h x l x L [mm] 124x215x410
Protection index IP20 IP23 with top cover CxxxxIP23
Certification ECE-R 10 (E24) yes yes n.a.
EC conformity
EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,
EN 61000-3-2, Dir. 89/336/EEC, LVD 73/23/EEC,
EN 50091-2, EN 60950-1
Operating temperature range -20 to 55
o
C
Ventilation from 45
o
C
Acoustic level without / with ventilation < 10 dB / < 35 dB
Warranty 2 years
Options
Solar charge controller XPC xxxx-S
Remote control (112 x 138 x 25mm / 20 m cable) RCC-01
IP-23 top cover C-IP23
AC cable cover CFC-01
Battery temperature sensor (58 x 51.5 x 22mm / 3 m
cable)
CT-35
Data may change without any notice