www.tanaka-usa.com
11 contacttanaka@tanaka-ism.com
Owner’s Manual
TED-210/TED-262L/R/DH/HS
Maintenance schedule
Below you will find some general maintenance instructions. For further information, please contact your
servicing dealer.
Daily maintenance
•
Clean the exterior of the unit.
•
Check that the drilling attachment is properly centered, sharp, and without cracks. An off-center
bit induces heavy vibrations that may damage the unit.
•
Check that the drilling attachment is sufficiently tightened.
•
Check that nuts and screws are sufficiently tightened.
Weekly maintenance
•
Check the starter, especially cord and return spring.
•
Clean the exterior of the spark plug,
•
Remove it and check the electrode gap. Adjust it to 0.6 mm (.024’), or change the spark plug.
•
Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.
•
Check that the gear case is filled with grease up to 3/4.
•
Clean the air filter.
Monthly maintenance
•
Rinse the fuel tank with gasoline.
•
Clean the exterior of the carburetor and the space around it.
•
Clean the fan and the space around it.