Filter
Top Products
Bill of Materials
4-2
4.1 Bill of Materials
Table 4-1 lists materials required for the SLUP051 EVM.
Table 4–1.SLUP051 Bill of Materials
Qty
Reference
Designator
Part Number Description MFG Size
2 C1, C4 TAJC106M016R Capacitor, 10 µF tantalum, 16 V, ±20%,
6032
AVX-Future 1210
1 C2 C0805X7R250-104KNE Capacitor, 0.1 µF ceramic, X7R, 25 V,
±10%, 805
Venkel 805
1 C3 ECJ-2YB1E224K Capacitor, 0.22 µF ceramic, X7R, 25 V,
±10%, 0805
Panasonic 805
1 C5 ECJ-2VCH100F Capacitor, 10 pF ceramic, NPO, 50 V,
±10%, 0805
Panasonic 805
1 D1 LN1361C(UY)-(TR) LED, green, GW type Panasonic
D2 LN1261CAL-(TR) LED, red, GW type Panasonic
2 J1, J10 AKZ500/2WP Terminal block, 2 pin Altech
4 J2, J5-J7 2340-6111TG Pin strip header, 3 pin 3M
5 J3a/b,
J4a/b,J8
2380-6221TG Pin strip header, 2 pin 3M
1 J9 ED350/3 (ED1610-ND) Terminal block, 3-pin On shore
1 R1 CR0805-105113F Resistor, 51.1 kΩ, 1%, 1/10W, see Note 1 Venkel 805
1 R2 CR0805-10W3163JT Resistor, 316 Ω, 1%, 1/10W, see Note 1 Venkel 805
1 R3 LR2512-01-R100-G Resistor, 0.10 Ω, 2%, 1W IRC 2512
1 R4 LR2512-01-R200-G Resistor, 0.20 Ω, 2%, 1W IRC 2512
1 R5 CR0805-10W1872F Resistor, 18.7 kΩ, 1%, 1/10W, see Note 1 Venkel 805
2 R6, R8
(see Note 3)
CR0805-10W5110F Resistor, 511 Ω, 1%, 1/10W, see Note 1 Venkel 805
1 R7 CR0805-10W9532F Resistor, 95.3 kΩ, 1%, 1/10W, see Note 1 Venkel 805
1 R9 CR0805-10W1000F Resistor, 100 Ω, 1%, 1/10W, see Note 1 Venkel 805
1 U1 bq2400x (see Note 2) Battery charger, linear, lithium-ion TI HTSSOP-20
1 PWB bq2400x EVM REV B PWB, bq2400x EVM REV B TI
Notes: 1) 5% tolerance rsistors may be used in place of 1% resistors if the application allows for it.
2) See Table 4.2 for 2400x charge stuatus configuration.
3) For bq24004/5/6 resistor value should be 1K.