Filter
Top Products
Part No. 90-0123-00
Libertycombi.p65 10/26/98
9
OPERATION
LOW BATTERY & OVERTEMP/OVERLOAD
- Red LEDs
• When both LEDs are blinking, an AC
backfeed has been detected. A backfeed
occurs when AC power from an external
source is connected to the output of the
inverter. Inspect wiring for possible input/output
wiring error. This condition will damage the unit
and must be corrected before further
operation.
TSC (Temperature Sensitive Charging)
This provides for the connection of a
sensor to measure battery temperature for
compensated charging. If no sensor is
connected the charge voltage levels are set to
defaults based on battery type.
OPTIONAL REMOTES
If using one of the remotes, refer to the
installation instructions included with the
remote.
Note: When a Remote Control Panel or
Link is installed, the jumper included in the
parts plastic bag is
not used in the Auxiliary
Switch Port (AUX SWITCH) on the front panel
of the inverter/charger. See page 23 for more
details.
Remote
TSC
Overtemp
Low
Battery
Freedom 20D
Auxiliary Port