Uniden 24-148 Welder User Manual


 
DDoo tthhiiss
Press during a call.
Press or during a call.
Press . The following
numbers will be sent as tone dialing.
Press . “
P“ appears in the
display which represents a pause.
ª
BASICS[ 14 ]
Making a Call
DDiiaalliinngg ffrroomm SSttaannddbbyy MMooddee
11
Enter the phone number.
22
Press
.
Talk“ flashes on the display.
Then current volume setting is displayed.
EExxaammppllee::
Volume Medium
Volume Medium and Ringer Off.
33
The number is dialed. After about 5 seconds, the call-time
display appears.
44
To hang up, press or place the handset on the base.
The call-time will be displayed for about 5 seconds.
Press if you
enter a wrong number
in step 1.
To delete all the numbers
that you have entered,
press and hold
until the display clears.
• You must press a key
within 20 seconds or the
phone will return to
standby.
TToo
To improve the reception
To adjust the earpiece volume
To temporarily switch to tone dial
(when the base is set to pulse mode)
To enter a pause within the dialing
sequence
Talk 0:00
8002971023
OOtthheerr OOppeerraattiioonnss
• Refer to terminology
explanation on page 3
if necessary.
5:15
Talk
UC772EZ ENG(24-148) 10/9/01 15:24 Page 14