Filter
Top Products
[ 42 ]
SSeelleeccttiinngg tthhee mmeessssaaggee rreeccoorrdd ttiimmee
You can set your answering system to record messages up to one or
four minutes long.
One minute option: move the
RREECC TTIIMMEE
switch to
11
.
Four minutes option: move the
RREECC TTIIMMEE
switch to
44
.
▼
AAnnnnoouunnccee oonnllyy ffeeaattuurree::
The announce only feature plays an outgoing message, but it will not allow
the caller to leave a message. Move the
RREECC TTIIMMEE
switch to the
AANNNN
position.
The message counter LED displays “ “ when the system is on standby.
Prerecorded outgoing message for Announce only feature is:
For example: “Hello, no one is available to take your call.“ (twice)
SSeelleeccttiinngg aa PPIINN ccooddee
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the
following steps.
11
On the base, press and hold until a tone sounds and the LED
displays .
22
To set the first number, press or repeatedly to scroll from 0
to 9. When the desired number appears in the display, press .
33
To set the second number, press or to scroll from 0 to 9.
When the desired number appears in the display, press . Then the
entered PIN code is announced.
Press and hold
or to quickly
scroll through numbers on
the display.
THE INTEGRATED ANSWERING DEVICE
UC772EZ ENG(24-148) 10/9/01 15:27 Page 42