Vicks PS-0K Welder User Manual


 
General information
1-1
R
1 General information
1.1 The following should be principally observed ...
With this Stud Welding Pistol you have purchased a product which
corresponds to the latest state-of-the-art in technology
complies fully to the present-day safety standards and
enables successful operating.
Please observe the following points in any case before installing the Stud
Welding Pistol:
Store the Operating Instructions in a place to which every Operator has
access.
Ensure that the respective Operator has read and understood the Operating
Instructions before installation. Each Operator should sign a written
confirmation to certify this.
Prevent use of Stud Welder by unauthorised personnel.
An electronics technician should check whether the electric supply is
properly protected by fuse and earthed.
Only trained personnel may use the Stud Welding Pistol.
ƽ MORTAL DANGER
Persons with cardiac pacemakers must not operate the Stud Welder and
must keep away from a Stud Welder during operation. Ensure in particular
that the Stud Welding System is not operated near electronically sensitive
life-saving equipment, as in intensive wards in hospitals.
WARNING
Ensure that sufficient distance to electronic equipment is kept. Highly
intensive electro-magnetic fields are created in stud welding which may
permanently damage these devices (e.g. television sets).
Furthermore, observe the safety instructions stated in Chapter 3.
Call a doctor in the event of an accident.
MORTAL DANGER
The S-symbol is the symbol for welding current sources permitted
for operation with increased electric danger. The S-symbol on our stud
welders refers exclusively to the welding current circuit and not to the
complete stud welder.