Filter
Top Products
10 Audio
Audio system controls
10
``
* Option/accessory, for more information, see Introduction.
249
To activate the system:
1.
Turn the ignition key to position I.
NOTE
If you switch off the ignition while the audio
system is on, the system will be on when the
ignition is switched on again.
2.
Press the POWER button (3) to switch the
audio system on or off.
Volume control
Turn the knob (2) clockwise or counterclock-
wise to raise or lower the volume. The volume
control is electronic and has no end position.
Volume can also be raised (+) or lowered (–)
using the steering wheel keypad.
Pause mode
If the volume is turned off, the CD player will go
into pause mode. Re-activate the player by
turning up the volume.
Selecting a sound source
•
Press AM/FM (4) repeatedly to toggle
between FM1, FM2, and AM
•
Press the CD button (1) to change to the
CD player or optional CD changer
•
Turn the SELECTOR control (5) to choose
FM1, FM2, AM, CD, CD changer*, AUX*,
Sirius satellite radio* or BT
1
(see
page 262).
The selected sound source will be shown in the
display.
Sound settings
G027147
1.
Press the SOUND button (2) repeatedly
until you come to the setting that you wish
to change. Choose
BASS, TREBLE,
FADER,
BALANCE, , CENTER* or
SURROUND*.
2.
Use the SELECTOR control (1) to adjust
the level of the setting you have selected.
The display shows a scale from min. to
max. position. The center indicates the
normal position.
NOTE
Sound level for the center speaker can only
be set if Dolby Pro Logic II (
DPL II) or three-
channel stereo (
3-CH) is selected in the
menu.
Setting Shown in the dis-
play
Bass
BASS
Treble
TREBLE
Balance between
the right and left
speakers
BALANCE
1
Bluetooth
streaming audio