Filter
Top Products
2. Operating position I (g. 10)
Swiveling the material feed pump to a vertical position allows
the material feed pump to be immersed in the coating material
container.
3. Operating position II (g. 11)
container suction system (accessory). In this position, there is open
space under the material feed pump.
4. Starting operation
4.1 Changing the material feed pump position
Be careful, as the moving parts of the swivel
mechanism can crush ngers and feet.
1. Grip handle (g. 8, item 1) with one hand.
2. Push locking pin (2) with the other hand.
3. Swivel material feed pump up or down to the desired
position, until the locking pin (2) locks into the new position.
1
2
1. Transport position (g. 9)
position.
Swiveling the material feed pump to a horizontal position also allows
removal of the pump from the coating material container.
Ensure that the locking pin locks.
GB
Starting operation