GB
Cleaning the unit (shutting down)
1
2
3
4
5
6
7
8
8.3 Cleaning Airless spray gun
– Rinse Airless spray gun with an appropriate cleaning agent.
– Clean tip thoroughly with appropriate cleaning agent so that
no coating material residue remains.
Intake lter in Airless spray gun (g. 16)
Dismounting
1. Pull protective guard (1) forward vigorously.
2. Screw handle (2) out of the gun housing. Remove intake lter
(3).
3. Intake lter congested or defective – replace.
Mounting
1. Place intake lter (3) with the long cone into the gun housing.
2. Screw handle (2) into the gun housing and tight en.
3. Snap in protective guard (1).
1
2
3