Filter
Top Products
3
CAUTION
!
Do not short out terminals on gas valve or primary control to test. Short or incorrect wiring can
cause equipment damage, property damage, and/or personal injury.
This control is not intended for use in locations where it may come in direct contact with water.
Suitable protection must be provided to shield the control from exposure to water (dripping,
spraying, rain, etc.).
PRECAUTIONSMOUNTING POSITIONS
1. Failure to turn o electric or main gas supply
to heating system could cause personal
injury and/or property damage by shock,
gas suocation, re, and/or explosion.
2. Do not use this control on circuits exceeding
specied voltage. Higher voltage will dam-
age the control and may cause shock or re
hazard.
3. NEVER USE FLAME OR ANY KIND OF SPARK
TO CHECK FOR GAS LEAKS–COULD CAUSE
FIRE AND/OR EXPLOSION.
4. Do not use a control set for natural gas with
LP gas, or a control set for LP gas with natural
gas. Personal injury and/or property dam-
age, gas suocation, re, and/or explosion
may result.
If you do not follow these instructions exactly, a re or explosion
may result, causing property damage, personal injury or loss of life.
5. Do not use a gas valve which appears to
be damaged. A damaged valve may cause
personal injury and/or property damage
due to shock, gas suocation, re, and/or
explosion. Contact supplier to replace any
valve that appears to have been damaged.
6. Do not use a gas valve which appears to
be damaged. A damaged valve may cause
personal injury and/or property damage
due to shock, gas suocation, re and/or
explosion. Contact supplier to replace any
valve that appears to have been damaged.
7. Do not use a gas valve that has been in
direct contact with water. Water entering
gas valve may result in concealed internal
damage to gas valve. Personal injury and/
or property damage, gas suocation, re
and/or explosion may result.
WARNING
!
DO NOT BEGIN INSTALLATION UNTIL YOU READ THE FOLLOWING
PRECAUTIONS.